Expert Answers about Livin Lite
- Bolt Hole to Use on Lower Bracket of RAS System for 2020 Ford F-150
- I checked with RoadActive and when installing the # RAS3611-YHD the bolt hole to use on the lower bracket that fits under the spring is the second one from the very end.
view full answer... - Comparing Phone Display and Monitor Display RVS Backup Camera Setups
- There are certainly pros and cons of the two Rear View Safety WiFi backup camera setups that you are interested in. The one that uses the phone display like part # RVS-83112-WiFi cost a little less since there's not monitor buy and there's less clutter possibly on the interior of your vehicle. Plus nothing would occupy your cigarette lighter port.
The other option part # RVS-83112 might be better if you find yourself using your phone a lot since it comes with a display. Or if you didn't...
view full answer... - Do I Need a Hitch Reducer Sleeve for the Swagman XTC-2 or XC-2 For a 2" Hitch
- Good news! The Swagman XTC-2 # S64670 and XC-2 # S64650 can both be used on either 1-1/4" and 2" hitches with the included shank adapter, which will help make sure the shank fits tightly in your 2" hitch. If for whatever reason you ever needed a hitch reducer you could use the Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver # HT02 to bring a 2" receiver down to a 1-1/4" receiver.
I've linked some review videos of these parts for you to check out.
view full answer... - Can the Kuat Sherpa 2.0 Fit with the 2021 Toyota Camry
- I have a solution for you, but an adapter will not solve the underlying problem with fitting the Kuat Sherpa 2.0, part # SH22G, to your 2021 Toyota Camry.
It looks like the highest class hitch for your vehicle is a Class II, and the Sherpa 2.0 needs at least a Class III.
The best thing I can recommend is getting a new bike rack. The Swagman Chinook, part # S64683, is compatible with 1-1/4" receivers and can handle 2 bikes at 45 pounds each. It utilizes a frame-mount. I've linked to a...
view full answer... - Towing Mirror for 2021 Nissan Titan SV
- While we do have towing mirror options for your 2021 Nissan Titan SV, the CIPA Slip on Towing Mirror # CM11401 is custom fit and is not confirmed by CIPA to fit on your Nissan Titan.
At the moment, we have universal towing mirror that are compatible for your truck. One option is CIPA Universal Towing Mirrors - Clamp On # CM11980-2. This is a set of two and clamps to the top of your factory mirror. I attached a review video below if you want to see how it looks and works on a 2017 Nissan...
view full answer... - Recommended Trailer Hitch Receiver For 2008 Chevy Cobalt LT 2 Door
- Your 2011 Chevy HHR has two trailer hitch receivers available which fit all trim levels of the HHR: the Draw-Tite # 24756 and the Curt # C11447. Neither of these two hitch receivers are confirmed to fit your 2008 Chevy Cobalt 2 Door LT. The correct receiver available for your vehicle is the Curt # C11430. I have attached an installation video for you. It is never recommended to use parts that are not designed specifically for your vehicle.
view full answer... - How To Choose Correct MORryde Shackle Upgrade Kit
- In order to choose the correct MORryde Shackle Upgrade Kit you'll need to know the length of your shackle straps. If you have 2-1/4" long shackle straps then you can use part # MR86ZR or if you have 3-1/8" long shackle straps you can use part # MR26ZR. These are the two most popular sizes.
view full answer... - Recommended 7" Brakes with 5-Bolt Hubs for Motorcycle Trailer
- The Electric Trailer Brake Kit part # AKEBRK-2 when combined with the Trailer Hub and Drum Assembly part # AKHD-545-2-EZ-1K will provide you with a 5 on 4-1/2" bolt pattern that is compatible with 12" wheels. If you don't already have brakes, you'll need to verify you have a four bolt brake mounting flange.
view full answer... - Can I Use a Yakima Overhaul HD with a Pace Edwards UltraGroove Tonneau Cover on 2021 GMC Sierra 2500
- Yes. The Yakima Overhaul HD # Y01151-58 is compatible with the Pace Edwards UltraGroove # PE48CV for your 2021 GMC Sierra 2500 with 6-3/4 foot bed when you use the # Y01155 adapter. These would be the correct parts for your truck and is going to give you a really nice looking setup.
I've linked some review videos of these for you to check out.
view full answer... - Best Trunk Mount Bike Racks For a 2004 Infiniti G35 Coupe
- For your G35 Coupe, I recommend looking at the Thule Passage 2-Bike Rack, # TH910XT. Thule is a leader in the bike rack industry, so you will not be sacrificing quality with this bike rack. This bike rack has narrow adjustable arms for easy loading, anti-sway cradles to keep the bike from moving and quick FitDial systems for easy mounting.
If you will be carrying any women's, children's, or alternative frame bikes, you will want to consider picking up a bike adapter bar like part # UB01....
view full answer... - Could Leaf Spring e94SR Fit a Heartland Cyclone
- When picking out leaf springs for a trailer priority one is the proper capacity. If you have 6k axles on your Heartland Cyclone then the 6-Leaf Double-Eye Spring # e94SR would fit and work well as a replacement.
The hanger kit part # K71-360-00 would then work well with this spring as well. If your older springs were worn out and sagging because of that these would eliminate the sag. Since these springs are a little bit thicker the trailer would sit up a bit taller if the springs mount...
view full answer... - Will a 3,500 Pound Capacity Electric Jack Work Well on 7,500 Pound Travel Trailer
- You can use a 3,500 pound capacity electric A-frame jack for your 7,500 pound travel trailer. The jack capacity does not need to match the weight of the trailer since the jack will not be lifting the weight of the entire trailer, only the trailer's weight at the tongue.
Our most popular 3,500 pound A-frame electric jack is the Stromberg Carlson Electric Trailer Jack with 23 inch Lift # JET-3755. I've attached a review video of this jack for you.
If you're concerned about the 3,500 pound...
view full answer... - Confirmation that the 3070-P Brake Controller Harness Does Fit 2016 Honda Pilot
- There were some changes that threw us off for the 2016 Honda Pilot but we have personally confirmed here at etrailer that this harness, # 3070-P, does fit the 2016 Pilot.
It turns out that the 2016 Acura MDX is the vehicle that this harness doesn't work with but it will work with the Pilot.
The 3070-P is all you would need to install the Prodigy P2 part # 90885.
view full answer... - Parts Needed to Install Pilot Chevy Hitch Cover # CR-007C on a 2016 Chevy Equinox LT
- It sounds like maybe your 2016 Chevy Equinox might not have the factory tow package. If it doesn't you will need a 4-way at the rear of the vehicle to power the Pilot Chevy lighted trailer hitch cover # CR-007C. The wiring harness I recommend for your vehicle is the # 118494.
If your vehicle came with the factory tow package you will not need anything more but the 4-way and a hitch at the back of the vehicle to power and hold the Pilot Chevy hitch cover. A great hitch for your vehicle...
view full answer... - Compatibility of Reese 15K 5th Wheel Hitch With Other Trucks
- The fifth wheel hitch itself isn't a vehicle specific item, but the install bracket/rails/hardware IS vehicle specific. The only other vehicle specific consideration is the size of the truck bed.
If you have a long bed truck, use a stationary hitch. For a 6-1/2 foot bed, you'd want to use a sliding hitch to provide the proper clearance between the front of the fifth wheel and the back of the truck cab. If you have the super short 5-1/2 foot bed, the slider won't provide enough clearance...
view full answer... - Trailer Wiring Harness for 2014 Kia Soul w/ LED Taillights
- The Tow Ready # 118637 would be the correct taillight wiring harness for your wife's 2014 Kia Soul.
If you click the provided link, you an see a video showing the # 118637 being installed on a 2014 Soul.
view full answer... - How to Mount Yakima Forklift on a 2014 Subaru Outback and Allow Rear Hatch to Open
- The great thing about the Yakima ForkLift Roof Mounted Bike Carrier # Y02098 that you referenced is that if needed you can mount it backwards which would give you the needed clearance to allow the rear hatch to open up.
I attached a demo video that shows this bike rack being used on a similar 2011 Outback as yours.
view full answer... - Replacement Q-Cam Cover for Yakima Q Towers
- They are exactly the same. You said you have Q Towers 124 ( # Y00124). That is what replacement Q-Cam cover # Y8810071 fits. The Q Towers are all the same though there have been changes over the years and this cover actually fits numerous models past and present.
view full answer... - Will Ranch Hitch Universal 5th-Wheel-to-Gooseneck Coupler Adapter AM3139 Work on Flatbed
- The Ranch Hitch Universal 5th-Wheel-to-Gooseneck Coupler Adapter # AM3139 will work on any standard (non-cushioned) 5th wheel pin box. With a gooseneck ball that is mounted on a flat bed truck you will want to make sure that there is enough space around the ball to allow the coupler to grip it. Sometimes flatbeds can have the ball recessed in a hole.
My contact at Anderson Rapid Hitch advised that this coupler requires a circular area of no less than 5-5/8-inches centered around the base...
view full answer... - Trailer Wiring Harness Fit for 2005 Audi Allroad Quattro
- We have a number of trailer wiring harness options for your 2005 Audi Allroad, but the wiring harnesses are all hardwire options that will need to be spliced into your vehicle's factory wiring system. Unfortunately none of our manufacturers offer a plug-in wiring harness to fit the factory connector you referenced.
To provide a 4-Way flat connector on your Allroad, I recommend installing the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236. You will use a circuit...
view full answer...
Go To Results